Chassis
Nettop PC with black chassis made of metal
Dimensions: 190 x 165 x 43 mm (LWH) = 1.35 litres
Weight: 1.3 kg net and 2.1 kg gross
Two holes for Kensington Locks and numerous
threaded holes (M3) at both sides of the chassis
Storage bay
1x 6.35 cm / 2.5″ storage bay supports one hard disk or SSD drive
Device height: 9.5 or 12.7 mm (max.)
Operation System
This system comes without operating system.
It is compatible with Windows 8, Windows 7, Windows Vista, Windows XP
and Linux (tested with OpenSUSE 12.2, Ubuntu 12.10 and Fedora 17)
Mainboard / Chipset / BIOS
Mainboard: Shuttle FS61
Chipset: Intel® H61 Express Chipset
AMI BIOS in 8 Mbit EEPROM with SPI interface
All capacitors are high quality solid capacitors
Supports hardware monitoring and watch dog functionality
Supports Unified Extensible Firmware Interface (UEFI) [2] Supports resume after power failure
Power Adapter
External 90 W power adapter (fanless)
Input: 100~240 V AC, 50/60 Hz
Output: 19 V DC, 4.74 A, max. 90 W
DC Connector: 5.5/2.5mm (outer/inner diameter)
Processor support
Socket 1155 (LGA 1155) supports the second and third generation of
Intel Core i3 / i5 / i7 / Pentium / Celeron processors
with a power consumption of up to 65 W TDP
– Codename «Sandy Bridge», 32nm process technology and
– Codename «Ivy Bridge», 22 nm process technology
Not compatible with older Socket-1156 processors.
The Processor integrates PCI-Express, memory controller
and the graphics engine on the same die (depends on processor type)
Please refer to the support list for detailed processor support information.
Processor cooling
Processor cooling with and two 60 mm fans on the upper side of the chassis
Memory support
2x SO-DIMM slots with 204 pins
Supports DDR3-1066/1333/1600 SDRAM memory (PC3-8500/10600/12800)
The maximum memory clock rate depends on the processor type.
Supports Dual Channel mode
Supports max. 8 GB per DIMM, maximum total size of 16 GB
Supports two unbuffered DIMM modules of 1.5 V
Integrated Graphics
The features of the integrated graphics function [3] depend on the used processor type.
«Sandy Bridge» processor: Intel® HD Graphics 2000/3000, DirectX 10.1
«Ivy Bridge» processor: Intel® HD Graphics 2500/4000, DirectX 11
Maximum shared memory size: 1692MB
Supports HDMI, max. resolution up to 1920×1200 @ 60Hz
Supports DVI, max. resolution up to 1920×1200 @ 60Hz
Supports D-Sub, max. resolution up to 2048×1536 @ 75Hz
(optional VGA-to-DVI-adapter required)
Supports Blu-ray Stereoscopic 3D with HDMI 1.4a [1] Supports HDCP function with DVI and HDMI ports
Supports Full HD 1080p Blu-ray (BD) / HD-DVD playback with DVI and HDMI ports
Supports Dual-Independent-Display via HDMI and DVI-I port
HDMI supports HD video plus multi-channel digital audio via a single cable
Mini PCIe Slots
1x Mini PCI Express expansion slot, full size
supports PCIe 2.0, SATA 3G and USB 2.0
e.g. for Mini SATA (mSATA) flash memory cards [6] Audio
Audio Realtek® ALC 662 High-Definition Audio (5.1 channel)
Two analog audio connectors (3.5mm) at the front panel:
1) 2 channel line out (head phone)
2) microphone input
Digital multi-channel audio output: via HDMI
Dual Gigabit LAN Controller
Dual Realtek 8111E Ethernet network controller (Gigabit)
Supports 10 / 100 / 1.000 MBit/s operation
With two RJ45 ports (dual network) supports Teaming [4] Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE)
Drive connectors
2x Serial-ATA II, 3 Gb/s (300 MB/s) bandwidth
Supports Unified Extensible Firmware Interface (UEFI) [2] Note: This barebone system comes with one pre-installed SATA cable
Card Reader
Integrated card reader
Supports SD, SDHC and SDXC memory flash cards
Supports boot up from SD card
Front Panel connectors
Microphone input
Audio Line-out (headphone)
4x USB 2.0
Power button
Power LED (blue)
HDD LED (yellow)
Back Panel connectors
HDMI connector [1] (supports DVI-D with optional adapter)
DVI-I connector (supports VGA with optional adapter)
2x USB 3.0
SD card reader
2x Gigabit LAN (RJ45)
2x RS232 serial ports (5V/12V, 1x switchable to RS422 / RS485)
DC-input connector for external power adapter
2 pin connector for power on button (2.54 mm pitch)
Perforation for Wireless LAN antennas (2 holes)
Other onboard connectors
6x USB 2.0 (three 2×5 pin headers)
2x USB 2.0 (2×5 pin, occupied by the front panel)
2x fan connectors (3pin and 4 pin) for the system fans
Clear CMOS jumper (2 pins)
Digital audio: S/PDIF output (3 pins)
Connector for CMOS battery (with battery)
2×10 pins LPC interface (2 mm pitch size)
2x front panel connectors (for audio)
Power connector for SATA drives (4 pins)
LVDS and converter conntector
Jumpers for panel voltage and converter voltage select
Scope of delivery
Multi-language user guide
VESA mount for 75/100mm standard (two metal brackets)
Four thumbscrews M3 x 5 mm (screws together VESA mount and PC)
Four screws M4 x 10 mm (to fix the VESA mount to the external device)
Four screws M3 x 4 mm (to mount a 2.5″ storage into the bay)
Driver DVD (Windows 7 32/64 bit, Windows Vista 32/64 bit, Windows XP 32 bit)
1x SATA cable (preinstalled for 2.5 HDD/SSD drive)
1x 4 pin to SATA power cable
External power adapter with power cord
Screws and heatsink compound
Environmental Specifications
Operating temperature range: 0~50 °C [7] Relative humidity, non-condensing: 10~90%
Conformity/Certifications
EMI: FCC, CE, BSMI, C-Tick
Safety: CB, BSMI, ETL
This device is classed as a technical information
equipment (ITE) in class B and is intended for use in
living room and office. The CE-mark approves the
conformity by the EU-guidelines:
– EMV-guideline 89/336/EWG electromagnetic tolerance
– LVD-guideline 73/23/EWG use of electric devices
within certain voltage-limits